A custom compatible encoder solution can be provided for PVS78E-021DRR0BN-0016 in maintenance, retrofit, replacement, and upgrade projects. This version combines a Ø12 mm solid shaft, clamping flange, radial terminal compartment with two cable glands, and 16-bit singleturn PROFIBUS feedback. Typical production lead time: 15 working days. The engineering goal is to preserve shaft alignment, terminal-box field wiring, and high-resolution singleturn data continuity so that field replacement remains controlled and practical.

Technical Overview of the PVS78E-021DRR0BN-0016 Encoder

This model belongs to a singleturn absolute PROFIBUS encoder platform using photoelectric sampling and binary code output. The order code indicates shaft dimension 02, clamping flange version 1, terminal compartment DR, radial exit R, aluminum housing N, and 16-bit singleturn resolution. The platform supports transfer rates from 0.0096 to 12 MBit/s and conforms to PNO profile 3.062 over RS-485.

Industrial Integration Considerations

For this variant, the terminal compartment with two cable glands is one of the main integration points. It is useful in fieldbus installations where bus in and bus out should remain clearly separated inside the connection hood. The removable hood also contains rotary switches for address setting and a slide switch for the terminating resistor, so bus addressing and end-of-line termination logic should be preserved during retrofit work.

Custom Compatible Encoder Solution

A custom compatible encoder solution for PVS78E-021DRR0BN-0016 should preserve the Ø12 mm shaft fit, clamping flange mounting, radial terminal compartment, and 16-bit singleturn PROFIBUS structure. This is especially relevant where controller-side scaling, preset behavior, and class-based parameter handling are already commissioned.

Custom Solution Photos

Lead Time and Custom Development

Typical production lead time: 15 working days.

Engineering review should confirm shaft size, clamping flange geometry, terminal-box cable entry, address setting practice, and whether the original installation uses full 16-bit resolution or scaled operating steps.

Typical Technical Parameters

PVS78E-011KRR0BN-0016 PROFIBUS Encoder Solution

A tailored compatible encoder solution can be developed for PVS78E-011KRR0BN-0016 in maintenance, retrofit, replacement, and upgrade applications. This model uses a Ø10 mm solid shaft, clamping flange, and radial terminal compartment with one cable gland and one stopping plug, together with 16-bit singleturn PROFIBUS output. Typical production lead time: 15 working days. The engineering focus is to keep field wiring continuity and compact shaft-side installation unchanged.

Technical Overview of the PVS78E-011KRR0BN-0016 Encoder

The coded structure identifies shaft dimension 01, clamping flange, KR terminal compartment, radial exit, aluminum housing, and 16-bit resolution. The encoder uses photoelectric sampling, binary code, and programmable code course with cw ascending or cw descending options. It supports Class 1 and Class 2 operation with scaling, preset, diagnostics, and speed-related functions.

Industrial Integration Considerations

Compared with the DR version, the KR connection style is more compact because it uses one cable gland and one stopping plug. This can be useful where bus routing is fixed and less internal cable branching is required. For retrofit continuity, the radial exit direction, participant address setting, and termination resistor logic should still be matched carefully to the installed PROFIBUS segment.

Custom Compatible Encoder Solution

For PVS78E-011KRR0BN-0016, a custom compatible encoder solution should preserve the Ø10 mm shaft, clamping flange, radial KR terminal hood, and 16-bit singleturn data behavior. This reduces site-side rework and helps maintain the original commissioning logic.

Custom Solution Photos

Custom solution photos

Lead Time and Custom Development

Typical production lead time: 15 working days.

The main review items are shaft fit, flange reference, radial hood orientation, and whether the original machine uses Class 2 parameterization or only base Class 1 data exchange.

Typical Technical Parameters

Related Models

PVS78E-011KRR0BI-0012 Stainless PROFIBUS Encoder
PVS78E-011DRR0BI-0013 Stainless PROFIBUS Encoder
PVS78E-011DRR0BI-0012 PROFIBUS INOX Encoder
PVS78E-011KRR0BN-0013 PROFIBUS Absolute Encoder Solution
PVS78E-022K5R0BN-0013 Servo Flange PROFIBUS Encoder