For 14-14361-60, EncoderWorks can provide a custom compatible replacement focused on 10–30 V push-pull receiver matching, 60 PPR low-pulse scaling, and ATEX keyed-shaft alignment. This model should not be treated as a generic low-resolution encoder. The pulse count is very low, so frequency overload is rarely the first risk; exact scaling, reference-pulse logic, and channel compatibility matter more.
The 14-14361-60 is an ATEX incremental rotary encoder configuration with photoelectric sampling, 60 PPR, 10–30 V push-pull output, A/B/0 plus inverted signal channels, IP66 protection, Ø12 mm keyed shaft, clamping flange, and 9-core 2 m cable connection. At 60 PPR, the controller must be checked for low-speed measurement window and quadrature evaluation.
The first failure boundary is low-pulse interpretation. If the PLC, drive, or counter expects 100, 120, 180, or another pulse count, A/B signals can look stable while speed, length, or angular position becomes wrong. The 0 reference pulse must also match the original indexing or homing logic.
This replacement fails when A/B/0 signals are stable, but the controller calculates the wrong motion value because 60 PPR scaling, push-pull input threshold, quadrature mode, or reference-pulse handling does not match the previous encoder. That is a configuration and signal-chain failure, not a sensing failure.
The second boundary is push-pull channel mapping. A, B, 0 and inverted A, B, 0 must be wired by function. A wrong inverted channel can weaken noise rejection, direction validation, or homing reliability even when basic counting appears normal.
Mechanically, the Ø12 mm keyed shaft and clamping flange must be checked with the coupling, pulley, or measuring wheel. ATEX suitability, PE shielding, cable route, and axial/radial shaft-load limits remain part of the replacement decision.
The replacement decision should first confirm ATEX marking, Ø12 mm keyed shaft fit, clamping-flange centering, 60 PPR scaling, 10–30 V push-pull receiver compatibility, A/B/0 plus inverted channel mapping, 100 kHz output-frequency margin, shield grounding, cable route, and shaft load. EncoderWorks treats 14-14361-60 as an industrial encoder custom compatible solution where push-pull signal matching and exact 60 PPR scaling decide field reliability.
Typical production lead time: 15 working days.
Key Data
| Item | Data |
|---|---|
| Model | 14-14361-60 |
| Encoder type | ATEX incremental rotary encoder |
| Detection type | Photoelectric sampling |
| Pulse count | 60 PPR |
| Output switching | 10–30 V push-pull |
| Signal output | A, B, 0 and inverted A, B, 0 |
| Supply voltage | 10–30 VDC |
| Output frequency | Max. 100 kHz |
| Shaft / flange | Ø12 mm keyed shaft, clamping flange |
| Connection | 9-core cable, 2 m |
| Protection class | IP66 |
| Main engineering anchor | Push-pull scaling and keyed shaft |
| Main failure boundary | Wrong scaling, receiver mismatch, inverted-channel error, shaft overload |
