PSM58N-F2AAGR0BN-1416 PROFIBUS Multiturn Absolute Encoder Custom Solution

We have developed a custom solution for model PSM58N-F2AAGR0BN-1416, configured for PROFIBUS-based motion systems requiring higher resolution and stable multiturn feedback. The design integrates a 12 mm recessed hollow shaft with enhanced bit structure for applications demanding higher positional precision. Typical production lead time: 15 working days.

Technical Key Parameters

• PROFIBUS interface (RS-485)
• Resolution: 14 bit multiturn + 16 bit singleturn
• Shaft: Ø12 mm recessed hollow shaft
• Supply voltage: 10–30 VDC
• Operating temperature: -40 … 85 °C

Custom Solution Photos

Wiring and Installation Notes

The terminal-compartment structure supports direct internal wiring. Ensure correct A/B differential pairing for bus signals and maintain continuity between Bus IN and Bus OUT. Address setting must be unique across the network. Termination resistor activation must match the physical bus position. During commissioning, verify parameter configuration consistency including resolution and scaling. Mechanically, ensure correct shaft alignment and avoid radial or axial stress. The anti-rotation device must be securely installed to maintain stability during operation.

Custom Compatible Encoder Solution

• 12 mm hollow shaft configuration
• High-resolution multiturn structure
• Terminal-based wiring layout
• Suitable for parameterized PROFIBUS systems

Lead Time and Custom Development

Production is arranged based on confirmed resolution and shaft configuration. Typical production lead time: 15 working days.

Technical Parameters Table

Technical Summary

This version focuses on higher resolution within the same platform, suitable for applications where precision and parameter control are critical.