We have developed a custom solution for model RSA 698 576774-01, based on the key mechanical and electrical parameters confirmed for this application. This configuration is built around a 58 mm housing, synchronous flange, Ø6 mm shaft, SSI communication, and a 12 + 13 bit resolution structure, with side outlet M23-12 connection for stable integration into existing control systems. Typical production lead time: 15 working days.
Technical Key Parameters
- Interface: SSI
- Resolution: 12 bit multiturn + 13 bit singleturn
- Housing diameter: 58 mm
- Shaft: Ø6 mm solid shaft
- Connection: side outlet M23-12
Custom Solution Photos
Wiring and Installation Notes
This model uses an SSI interface, so wiring quality directly affects signal stability and data integrity. The clock and data lines should be routed with shielding and kept separate from motor power cables, brake cables, and inverter output lines. For longer cable runs, stable grounding strategy and clean shielding termination are important to reduce communication noise. The side outlet M23-12 connector should be installed with enough clearance for cable bending radius and connector locking.
Mechanically, the encoder is configured with a synchronous flange and Ø6 mm shaft, so concentric mounting and shaft alignment should be controlled carefully during installation. Excessive axial preload, radial force, or forced coupling alignment should be avoided, especially on smaller shaft structures. The mounting face should remain flat and stable to prevent vibration from affecting long-term signal consistency.
Custom Compatible Encoder Solution
- 58 mm encoder structure with synchronous flange mounting
- SSI communication for absolute position feedback
- 12 + 13 bit resolution structure for system matching
- Side outlet M23-12 connection for compact wiring layout
Lead Time and Custom Development
This model is organized as a custom solution based on the confirmed key parameters currently available. If additional electrical details or installation dimensions are later confirmed, the configuration can be refined accordingly. Typical production lead time: 15 working days.
Technical Parameters Table
| Layer | Item | Specification |
|---|---|---|
| Interface | Communication | SSI |
| Resolution | Singleturn | 13 bit |
| Resolution | Multiturn | 12 bit |
| Resolution | Overall resolution | 25 bit |
| Mechanical | Housing diameter | 58 mm |
| Mechanical | Flange type | Synchronous flange |
| Mechanical | Shaft type | Solid shaft |
| Mechanical | Shaft size | Ø6 mm |
| Connection | Outlet direction | Side outlet |
| Connection | Connector type | M23-12 |
Technical Summary
RSA 698 576774-01 is configured here as a compact 58 mm SSI absolute encoder with synchronous flange mounting, Ø6 mm shaft, and M23-12 side outlet connection. The engineering focus of this solution is mechanical fit, stable SSI signal transmission, and practical installation reliability based on the confirmed project parameters.
