DAB65-S360WC01 and DAB65-S360CA01 Alternative Solutions
We provide DAB65-S360WC01 and DAB65-S360CA01 encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges. The picture is the real photo of the replacement solution.
Minimum measuring range 0 to 30° <)
Maximum measuring range 0 to 360° <)
Contactless electro-optical sensor system
With 12 Bit D/A-Converter
Three different signal outputs at option:
0 to 20 mA or 4 to 20 mA or 0 to 10 VDC
Two adjustment modes to set measuring
range, zero point and signal sense
Robust, heavy duty design
Construction
Flange and case in anodised aluminium - shaft in stainless steel - 12 mm ball-bearings with Nilos ring or radial packing ring seal - code disc in plastic or glass - GaAlAs diode and photo-transistor array - gate array - customer specific microprocessor - multifunctional ASIC - 12 Bit D/A converter - SMD
technology.
Option: 13 Bit sensor system for measuring ranges ≤ 60°< . ) The Models DAB 58, DAB 65 and DAB 66 have different shaft, flange and case dimensions and different types of electrical connections ( for details see page 3 ).
Functional description and adjustement modes
The DAB Transducers have been derived from the CBE Single-turn-Encoders. They feature an electro-optical sensor system with digital signal processing and a D/A converter. The digital processing unit is designed to resolve any measuring range up to 360°< . The 12 Bit D/A-converter transforms these ) positions into a proportional analogue signal.
If not otherwise specified the transducer will be supplied with a measuring range of 0 to 360° < and CW signal sense, i.e. ) increasing output signal with view on shaft end. If the user chooses a smaller measuring range, e.g. 270°< , there will be ) an overflow when leaving the specified range. In this event the output signal keeps its maximum level, i.e. 20 mA up to 360°
