We developed a custom solution for model UCD-DPC1B-1413-Y060-H72. Selected when multi-turn absolute feedback is required via Profibus, using a 58 mm synchro flange with 6 mm solid shaft, without battery-based turn counting. Typical production lead time: 15 working days.
Key Specifications
- Interface: Profibus DPV0 / DPV1 / DPV2 Class 2
- Resolution: 13-bit single-turn + 14-bit multi-turn
- Code: Binary
- Multi-turn: self-powered magnetic counter, no battery, no gear train
- Supply: 10–30 VDC
- Protection: IP66/IP67
- Structure: 58 mm synchro flange, 6 mm solid shaft, 10 mm shaft length
- Speed: up to 3000 rpm
Decision Snapshot
- Best for: Profibus absolute positioning systems requiring compact shaft installation
- Key fit: 6 mm solid shaft, 58 mm synchro flange
- Avoid if: system uses non-Profibus architecture or only requires incremental feedback
Custom Solution Photos
Encoder structure reference: 58 mm synchro flange, 6 mm solid shaft, radial M12 bus connector layout.
Bus Configuration & Communication
- Profibus Class 2 communication
- Transmission up to 12 Mbaud
- Cycle time ≥ 1 ms
Primary integration risk: node address or termination misconfiguration.
Best practice: verify address → termination → bus continuity before power-up.
Mechanical & Installation Focus
- 6 mm solid shaft, compact structure
- Synchro flange mounting
Primary constraint: small shaft alignment sensitivity.
Key point: coupling accuracy directly affects stability and lifetime.
Wiring & Bus Topology
- M12 bus connectors
- Bus in / bus out structure
Primary issue: bus topology errors, not sensing.
Integration & Compatibility
- Profibus distributed systems
- Compact shaft installations
- Not suitable for incremental or Ethernet-based systems
Lead Time
Typical production lead time: 15 working days.
Key Technical Data
| Item | Data |
|---|---|
| Model | UCD-DPC1B-1413-Y060-H72 |
| Interface | Profibus |
| Type | Multi-turn |
| Resolution | 13 + 14 bit |
| Shaft | 6 mm |
| Flange | 58 mm |
