For ASS58N-F3AAAR0GN-0016, EncoderWorks can provide a custom compatible replacement focused on Gray-code SSI pin mapping, 16-bit singleturn scaling, and Ø15 mm recessed hollow-shaft installation. This model should not be treated like the 12-bit version. The housing and connector may look similar, but the controller must accept a 65536-step singleturn word with the same SSI timing, Gray decoding, zero-set behavior, and direction logic.
The ASS58N-F3AAAR0GN-0016 is an SSI singleturn absolute encoder configuration with Gray code, 16-bit singleturn resolution, 4.5–30 VDC supply, aluminum housing execution, Ø15 mm x 30 mm recessed hollow shaft, 12-pin M23 connector, and radial exit. It should be handled as singleturn angle feedback, not as a multiturn encoder.
The first failure boundary is SSI connector accuracy. Clock+ / Clock- and Data+ / Data- must remain true RS422 differential pairs. If the M23 pin assignment is copied incorrectly, reserved pins are used, or the PLC expects binary code or a shorter word length, the SSI frame can be stable while the decoded angle is wrong.
This replacement fails when SSI communication is present, but the PLC reads the wrong singleturn position because M23 pin mapping, Gray decoding, 16-bit word length, PRESET 1 input, or V/R direction state does not match the original encoder. That is a signal-chain and parameter failure, not simply a sensing failure.
The second boundary is Ø15 mm recessed-shaft installation. The shaft is not solid and not a simple through bore. The machine shaft must enter within the 15–30 mm insertion range, while the torque rest prevents housing rotation without radial, axial, or angular preload.
The replacement decision should first confirm Gray SSI format, 16-bit singleturn mapping, radial M23 pin assignment, Clock/Data differential wiring, 20 ±10 µs monoflop behavior, V/R direction input, PRESET 1 zero-set logic, 4.5–30 VDC supply, Ø15 mm recessed shaft fit, insertion depth, torque rest contact, shield grounding, and offset limits. EncoderWorks treats ASS58N-F3AAAR0GN-0016 as an industrial encoder custom compatible solution where 16-bit SSI word accuracy and Ø15 recessed-shaft mechanics decide field reliability.
Typical production lead time: 15 working days.
Key Data
| Item | Data |
|---|---|
| Model | ASS58N-F3AAAR0GN-0016 |
| Encoder type | Singleturn absolute encoder |
| Interface | SSI / RS422 |
| Resolution | 16-bit singleturn |
| Position range | 65536 steps per revolution |
| Code | Gray |
| Supply voltage | 4.5–30 VDC |
| Transfer rate | 0.1–2 MBit/s |
| Housing execution | Aluminum, powder coated |
| Shaft type | Recessed hollow shaft |
| Shaft size | Ø15 mm x 30 mm |
| Connection | 12-pin M23 connector |
| Exit position | Radial |
| Control inputs | V/R direction, PRESET 1 zero-set |
| Main engineering anchor | Gray SSI and 16-bit angle |
| Main failure boundary | Wrong M23 pin mapping, Gray decoding error, preset fault, shaft insertion error |
