The GM400.0202102 and GM400.A202102 models can be replaced with a fully compatible SSI encoder 1:1 replacement designed for industrial automation and motion control environments. The replacement mirrors the original encoder’s electrical interface and functional behavior, ensuring seamless integration without adjustments to existing control systems.
This encoder provides absolute multiturn position feedback through an SSI interface with a total resolution of 25 bits. The combination of singleturn precision and reliable multiturn counting guarantees accurate positioning across multiple revolutions. High switching speeds and stable code transmission ensure consistent feedback in dynamic applications requiring fast sampling.
Mechanically, the encoder supports common industrial mounting standards, enabling easy installation on existing shafts and flanges. Built-in self-diagnostics continuously monitor signal integrity, internal component status, and code stability, reducing the risk of unexpected downtime and supporting preventive maintenance.
This replacement solution is suitable for automated machinery, servo-driven systems, and industrial positioning equipment where high-resolution absolute feedback, operational reliability, and consistent long-term performance are critical.
Technical data
| Parameter | Value |
| Supply voltage | 10...30 VDC with reverse voltage protection |
| Current consumption | Max. 50 mA (w/o load) for 24 VDC |
| SSI pulse frequency | 62.5 kHz up to 1.5 MHz |
| Mono-flop time | 20 μs |
| Pulse space | Min. 25 μs |
| Code switching speed for sampling | 800 kHz |
| Deviation of sampling measuring step | 0.025 degree at 400 kHz 0.05 degree at 800 kHz |
| Electric connector | The electric connector must not be plugged on or removed whilst under voltage. |
| Parameter | Value |
| RPM value | mechanical: Max. 10,000 RPM electrical: Max. 6,000 RPM |
| Anlauf-Drehmoment | w/o seal (IP54): < 0.010 Nm with seal (IP65): < 0.015 Nm |
| Shaft loading | axial: < 20 N radial: < 40 N |
| Inertia torque | 2 x 10⁻⁶ kgm² |
| Material | Housing: Steel Flange: Aluminium |
| Weight | Approximately 400 g |
| Parameter | Value |
| Ambient temperature | -20...+60 °C |
| Storage temperature | -20...+70 °C |
| Protection to | Shaft w/o seal: IP 54 Shaft with seal: IP 65 |
| Relative humidity | Max. 95 %, non-condensing |
| Endurance - Vibration | IEC 68 Section 2 - 6 (≤100 m/s² / 16-2000 Hz) |
| Endurance - Shock | IEC 68 Section 2 - 27 (≤2000 m/s² / 6 ms) |
| Interference immunity | EN 50082-2 EN 61000-4 - 2 to 4 Severity grade 3 |
| Emmited interference | EN 50081-2 |
