We offer fully customizable replacement solutions for the UCE-AV002-0013-E14W-HFZ absolute encoder. Our team can customize specifications, performance parameters, and dimensions to ensure compatibility with the original model or surpass its performance while ensuring seamless integration. Customization options include resolution, mechanical dimensions, and environmental protection ratings. As a reliable alternative supplier, we provide professional technical support tailored to your specific application requirements.

UCE-AV002-0013-E14W-HFZ: Seamless-Compatible Custom Alternative Absolute Encoder-EncoderWorks
UCE-AV002-0013-E14W-HFZ: Seamless-Compatible Custom Alternative Absolute Encoder-EncoderWorks

Interface

InterfaceAnalog Voltage
Manual FunctionsStart and End point via Cable or Connector

Electrical Data

Supply Voltage8 – 32 VDC
Current ConsumptionTypical 15 mA @24V (no load)
Start-Up Time<500 ms
Min. Load Resistance5 kΩ
Analog Accuracy@ 10 V = ±10 mV (with an ideal power supply)
Linearity0.15%
Settling Time32 ms (from min value to max value jump)
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF300.9 years @ 40 °C

Sensor

TechnologyMagnetic
Resolution Singleturn13 bit
Resolution Multiturn0 bit
Accuracy (INL)±0.0878° (≤ 12 bit)
Sense Signal (Default)Counterclockwise shaft movement (front view on shaft)
CodeAnalog Voltage 0 – 10 V
Minimum Measurement Range0 – 11.25°
Resolution of OutputMax. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees)
Multiturn RangeSingleturn

Environmental Specifications

Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Humidity98% RH, no condensation
Max Temperature+70 °C (+158 °F)
Min Temperature-40 °C (-40 °F)

Mechanical Data

Connection Cap MaterialStainless Steel V4A (1.4404; 316 L)
Housing MaterialStainless Steel V4A (1.4404, 316 L)
Housing CoatingNo Coating
Flange TypeBlind Hollow, ø 78mm ATEX
Flange MaterialStainless steel V4A (1.4404, 316 L)
Shaft TypeBlind Hollow, Depth = 30 mm
Shaft Diameterø 14 mm (0.55")
Max. Shaft LoadAxial 60 N, Radial 80 N
Rotor Inertia≤ 35 gcm² [≤ 0.2 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 11 ms, EN 60068-2-27)
Vibration Resistance≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6)
Length134 mm (5.28")
Weight3110 g (6.86 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm

Electrical Connection

Connection OrientationRadial
Connection Type2 x Blind Plug, Radial

Certification

ApprovalCE + ATEX Zone 1 & 21 (Oil+Gas)