This OEM-grade encoder for the CRF65-4096G4096C20 is developed as a fully compatible alternative, maintaining the original 4096×4096 multi-turn resolution and parallel output format. All mechanical and electrical characteristics—including housing structure, flange dimensions, shaft interface, installation depth, and connector layout—are precisely matched to ensure direct plug-and-play integration. It is designed for users who require consistent absolute position feedback while facing sourcing difficulties with the original model. Standard production lead time is 10–15 working days.
In practical applications, this encoder demonstrates stable multi-turn tracking, high positional accuracy, and reliable long-term performance. It has been applied in industrial automation systems where dependable absolute feedback is essential, such as CNC machinery, wind energy equipment, automated production lines, and material-handling systems. Its OEM-level consistency makes it suitable for both maintenance replacement and long-term supply planning.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
