EncoderWorks EncoderWorks
  • Home
  • Fundamentals
  • Applications
  • Selection & Replacement
  • Fault Diagnosis
  • About
Home › Selection & Replacement › DAF66-12B04 – Customized Replacement Solution

DAF66-12B04 – Customized Replacement Solution

EncoderWorks Team
9 monthsago

A customized replacement solution is available for DAF66-12B04, engineered to maintain the original 4–20 mA absolute output and installation geometry for straightforward integration. The replacement is configured according to the existing electrical and mechanical requirements, avoiding changes to wiring, mounting, or control logic. This approach helps reduce overall cost and sourcing complexity while supporting typical delivery within approximately 15 working days, even for small-volume or non-standard requests.

In practical use, the replacement encoder provides stable current-loop feedback over long cable runs and under electrically noisy conditions. Its consistent absolute position output supports reliable operation in industrial automation, process control equipment, and material handling systems where signal stability and predictable performance are essential for continuous operation.

Reference Images

DAF66-12B04 – Customized Replacement Solution-EncoderWorks
DAF66-12B04 – Customized Replacement Solution-EncoderWorks

Electrical data

ParameterValue
Valid for all versionsUnless otherwise stated
Sensor system:GaAIAs diode, photo-transistor array, precision comparator
Setting cycles EEPROM:≥10^6
Multifunctional inputs (MFP):Depending on adjusting mode (signal input E6)
Memory circuit (latch):Through MFP
Disc coding:Gray code
Signal sense:CW or CCW (signal input E6)
Supply voltage range V_s:+20 to +26 VDC, 15±0.5VDC(optional)
Supply current I_s:80 mA typ. / 120 mA max. (when output current = 0)
Linearity:0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted
Temperature drift:0.0015% / K typ.
Current output
  Accuracy
    at starting point 0 mA:0 mA ±5 μA typ. / ±15 μA max.
    at end point 4 mA:4 mA ±5 μA typ. / ±15 μA max.
  Load resistance:0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC
Voltage output
  Accuracy
    at starting point 0 V:0 V ±2.5 mV typ. / ±7.5 mV max.
    at end point 10 V:10 V ±2.5 mV typ. / ±7.5 mV max.
  Output current:5 mA max. When load resistance > 2 kΩ (short circuit proof)
EncoderWorks Technical Support

Contact Support

WeChat: +86 150 5045 0799 (WhatsApp)

Email: encoderworks@outlook.com

EncoderWorks Technical Support

Contact Support

WeChat: +86 150 5045 0799 (WhatsApp)

Email: encoderworks@outlook.com

DAF66-12B11 –Customized Replacement

Previous

DAF66-12B20 – Customized Replacement Solution

Next

EncoderWorks Team

WeChat:+86 150 5045 0799 ( WhatsApp) Email:encoderworks@outlook.com
4343
Posts
0
Comments
0
Likes

Articles

XHI 893 1347503-01 Heavy-Duty Blind Hollow Shaft Incremental Encoder
5842-00024: Through-Hollow-Shaft Absolute Encoder
CDV115M-00001: Heavy-Duty SSI + Incremental Encoder
CDV115M-00002 SSI + Incremental Heavy-Duty Absolute Encoder

Related posts

OCD-PPA1G-0412-C120-PRT:Parallel Encoder 1:1 Replacement

OCD-PPA1G-0412-C120-PRT:Parallel Encoder 1:1 Replacement

EncoderWorks Team
CHV58M-A-S Absolute Encoder

CHV58M-A-S Absolute Encoder

EncoderWorks Team
OCD-PPA1B-0008-B060-CRW:Parallel Encoder 1:1 Replacement

OCD-PPA1B-0008-B060-CRW:Parallel Encoder 1:1 Replacement

EncoderWorks Team
Customizable Replacement for OCM-CAA1B-1212-F10W-HFZ Absolute Encoder – Tailored to Your Needs

Customizable Replacement for OCM-CAA1B-1212-F10W-HFZ Absolute Encoder – Tailored to Your Needs

EncoderWorks Team

About

EncoderWorks focuses on industrial encoder technology, interface compatibility, and system integration.

Column

Home Fundamentals Selection & Replacement Applications Fault Diagnosis Contact

Contact

encoderworks@outlook.com
© 2026 EncoderWorks. All rights reserved.
  • Home
  • Fundamentals
  • Applications
  • Selection & Replacement
  • Fault Diagnosis
  • About

EncoderWorks Team

WeChat:+86 150 5045 0799 ( WhatsApp) Email:encoderworks@outlook.com