The CRF65-4096G4096C05 Replacement Model is engineered as a true 1:1 parallel absolute encoder alternative, fully matching the original 4096×4096 multi-turn resolution and parallel signal output. All mechanical and electrical specifications—including housing dimensions, shaft interface, flange structure, mounting depth, and pin assignment—are precisely replicated. This ensures direct plug-and-play installation without changes to the existing control system or mechanical layout. Standard production lead time is 10–15 working days, supporting fast replacement and maintenance planning.
This replacement model has been supplied to industrial users across Russia, Southeast Asia, the Middle East, Brazil, and Ukraine. Customers value its stable multi-turn accuracy, robust mechanical construction, and long-term operational reliability. It is well suited for CNC machinery, automated assembly lines, lifting equipment, and energy-related systems where dependable absolute position feedback and consistent performance are critical.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
