For 14-14361-4000, EncoderWorks can provide a custom compatible replacement focused on 10–30 V push-pull receiver matching, 4000 PPR counter margin, and ATEX keyed-shaft alignment. This model should not be handled like a medium-pulse encoder. At 4000 PPR, operating speed, input filtering, cable capacitance, quadrature mode, and the 100 kHz output-frequency limit must be checked before approval.
The 14-14361-4000 is an ATEX incremental rotary encoder configuration with photoelectric sampling, 4000 PPR, 10–30 V push-pull output, A/B/0 plus inverted signal channels, IP66 protection, Ø12 mm keyed shaft, clamping flange, and 9-core 2 m cable connection. The high pulse density makes frequency margin a primary replacement boundary.
The first failure boundary is edge loss. A slow manual rotation test may show clean A/B/0 signals, while production speed causes missed counts because the counter input cannot preserve every transition. Push-pull output does not compensate for weak shielding, long cable runs, or aggressive input filters.
This replacement fails when A/B/0 signals are visible, but the controller loses counts because 4000 PPR, shaft speed, push-pull input threshold, or input filtering exceeds the real 100 kHz signal margin. That is a signal-chain failure, not simply an encoder failure.
The second boundary is push-pull channel mapping. A, B, 0 and inverted A, B, 0 must be wired by function. A wrong inverted channel can reduce noise rejection, disturb direction validation, or make homing unreliable even when basic counting appears normal.
Mechanically, the Ø12 mm keyed shaft and clamping flange must be checked with the coupling, pulley, or measuring wheel. ATEX suitability, PE shielding, cable routing, axial load, and radial load remain part of the replacement decision.
The replacement decision should first confirm ATEX marking, Ø12 mm keyed shaft fit, clamping-flange centering, 4000 PPR counter capacity, 10–30 V push-pull receiver compatibility, A/B/0 plus inverted channel mapping, 100 kHz output-frequency margin, shield grounding, cable route, operating speed, and shaft load. EncoderWorks treats 14-14361-4000 as an industrial encoder custom compatible solution where push-pull edge margin and keyed-shaft mechanics decide field reliability.
Typical production lead time: 15 working days.
Key Data
| Item | Data |
|---|---|
| Model | 14-14361-4000 |
| Encoder type | ATEX incremental rotary encoder |
| Detection type | Photoelectric sampling |
| Pulse count | 4000 PPR |
| Output switching | 10–30 V push-pull |
| Signal output | A, B, 0 and inverted A, B, 0 |
| Supply voltage | 10–30 VDC |
| Output frequency | Max. 100 kHz |
| Shaft / flange | Ø12 mm keyed shaft, clamping flange |
| Connection | 9-core cable, 2 m |
| Protection class | IP66 |
| Main engineering anchor | Push-pull margin and ATEX shaft |
| Main failure boundary | Edge loss, receiver mismatch, inverted-channel error, shaft overload |
