1066183-01 RSA 507 SSI Binary Signal Timing

EncoderWorks provides a custom compatible replacement solution for 1066183-01 RSA 507 focused on maintaining SSI Binary communication behavior, Ø6 mm shaft mounting compatibility, and singleturn position data consistency. The replacement challenge is not only matching the 13-bit absolute position output, but also preserving SSI clock/data timing, controller-side binary data interpretation, and synchro flange installation conditions. SSI communication may remain available while incorrect timing, signal mapping, or mechanical adaptation still affects position accuracy.

System Limits

SSI replacement reliability depends on maintaining consistent serial communication between the encoder and the controller. The 1066183-01 RSA 507 uses SSI Binary output with 13-bit singleturn resolution. Clock timing, inverted clock/data signals, hold function, code sequence direction, and binary data interpretation must be matched because differences in serial communication processing can result in incorrect position values or additional commissioning adjustments.

The mechanical integration boundary includes shaft fit, flange mounting, and installation stability. This model uses a Ø6 mm round shaft with a synchro flange (63-type) mounting structure and a 3 m radial cable connection. Shaft alignment, flange positioning, cable routing, shielding, and grounding continuity should be maintained because mechanical mismatch or electrical interference can affect long-term position feedback reliability.

Wiring & Installation

SSI integration requires verification of clock, inverted clock, data, inverted data, hold, code sequence, power supply, and shield connections. The configuration uses dedicated SSI signal wiring through the radial cable connection. Incorrect signal mapping, missing complementary signal connections, poor shielding, or improper grounding may result in unstable serial communication or inaccurate position evaluation.

During replacement installation, the Ø6 mm round shaft and synchro flange interface should be checked against the existing machine structure. The radial cable outlet, mounting stability, vibration conditions, and environmental protection requirements should be considered together to maintain reliable SSI feedback performance.

Custom Compatible Solution

• Match SSI Binary communication behavior and controller-side serial data interpretation.
• Preserve 13-bit singleturn position structure and code sequence configuration.
• Adapt Ø6 mm round shaft and synchro flange (63-type) mechanical mounting requirements.
• Validate SSI timing, signal mapping, shielding, and grounding conditions.

Typical production lead time: 15 working days.

Key Data