We developed a custom solution for model OCD-PPA1B-00AA-B12S-5AW. Selected when single-turn absolute feedback is required via parallel push-pull output, using a 58 mm blind hollow structure with 12 mm shaft, without adding multi-turn functionality or fieldbus communication. Typical production lead time: 15 working days.
Key Specifications
- Interface: parallel push-pull
- Resolution: 9-bit single-turn
- Code: Binary
- Supply: 10–30 VDC
- Protection: IP66/IP67
- Structure: 58 mm blind hollow, 12 mm shaft, 30 mm depth
- Cable: 5 m axial PVC
- Speed: up to 3000 rpm
- Sensing: optical
Decision Snapshot
- Best for: single-turn parallel absolute positioning systems with long cable routing requirements
- Key fit: 12 mm hollow shaft, 58 mm blind hollow flange, 5 m axial cable
- Avoid if: the application requires multi-turn retention, bus communication, or incremental-only feedback
Custom Solution Photos
Encoder structure reference: 58 mm blind hollow flange, 12 mm shaft, 5 m axial cable outlet.
Signal & Output Logic
- Bit 1–9 parallel output
- Includes Latch and DIR control
- Direction configurable via cable or connector setting
Primary integration reason: direct controller-side reading of single-turn absolute position without protocol conversion.
Primary limitation: this structure is efficient for basic parallel absolute systems, but it does not provide multi-turn data or network communication capability.
Wiring & Installation
- Connection: 5 m axial PVC cable
- Long cable structure for remote panel or cabinet routing
Primary commissioning risk: incorrect controller-side signal mapping on bit order, Latch, and DIR logic.
Primary installation constraint: cable routing discipline.
The 5 m cable length is useful for cabinet reach, but it also makes bend radius, shielding quality, and strain relief more important than on short-cable versions.
Integration & Compatibility
- Designed for single-turn parallel absolute encoder systems
- Matches 58 mm blind hollow installations with 12 mm shaft
- Suitable for direct position reading without bus conversion
- Not suitable for multi-turn systems or fieldbus architectures
Lead Time
Typical production lead time: 15 working days. Custom adaptation can be developed around shaft fit, cable length, output assignment, and installation requirements.
Key Technical Data
| Item | Data |
|---|---|
| Model | OCD-PPA1B-00AA-B12S-5AW |
| Interface | Parallel push-pull |
| Type | Absolute single-turn |
| Sensing | Optical |
| Resolution | 9 bit |
| Code | Binary |
| Supply | 10–30 VDC |
| Protection | IP66/IP67 |
| Flange | 58 mm blind hollow |
| Shaft | 12 mm |
| Depth | 30 mm |
| Cable | 5 m axial |
| Speed | 3000 rpm |
