We developed a custom solution for the OCD-PPA1G-0812-S100-PRT model for systems that prefer direct parallel position transfer together with a conventional solid-shaft installation. This configuration combines an 8-bit multiturn range with 12-bit singleturn feedback, a 58 mm synchro flange, and a 10 mm solid shaft, making it more suitable for high-speed rotating machinery than hollow-bore parallel variants. Typical production lead time: 15 working days. The original version uses push-pull parallel output, gray code, optical sensing, a 10–30 VDC supply, an M23 26-pin connector, and IP65 enclosure protection.
Technical Key Parameters
- Parallel push-pull output
- 12-bit singleturn + 8-bit multiturn resolution
- Gray code
- 58 mm synchro flange
- 10 mm solid shaft, 20 mm length
- M23 male 26-pin connector
- 10–30 VDC supply
- IP65 protection
- Max speed 12000 rpm
- Radial load up to 110 N
Custom Solution Photos
Wiring and Installation Notes
The strength of this model lies in combining high-speed mechanical capability with straightforward parallel signal transfer. Because the output is bit-based rather than bus-based, cabinet wiring must be planned carefully, especially where many parallel lines are routed through a single M23 connector. On the mechanical side, the solid shaft and synchro flange layout are better suited to installations that already use coupling-based alignment rather than hollow-shaft clamping. Compared with the 11 mm blind-bore parallel version, this model is more naturally positioned for shaft-coupled rotary systems where speed reserve, radial load capacity, and conventional flange mounting are more important than direct shaft insertion.
Custom Compatible Encoder Solution
- Parallel push-pull signal adaptation for existing controller logic
- Mechanical replacement solution for 58 mm synchro flange and 10 mm solid shaft
- M23 pin-definition customization for retrofit installations
- High-speed integration support for shaft-coupled machine layouts
Lead Time and Custom Development
Typical production lead time is 15 working days. We can support custom work for shaft geometry, connector pinout, and signal adaptation in parallel-output replacement projects.
Key Technical Data
| Item | Data |
|---|---|
| Interface | Parallel push-pull |
| Resolution | 12-bit singleturn / 8-bit multiturn |
| Code | Gray |
| Supply voltage | 10–30 VDC |
| Mounting | Synchro flange, 58 mm |
| Shaft type | Solid shaft |
| Shaft diameter | 10 mm |
| Connector | M23 male, 26-pin |
| Protection class | IP65 |
| Max speed | 12000 rpm |
