OCD-PPA1G-0409-B110-PRT Parallel Push-Pull Absolute Encoder Custom Solution

We developed a custom solution for the OCD-PPA1G-0409-B110-PRT model, centered on compact parallel output integration rather than fieldbus communication. This version combines a blind hollow bore structure with a 58 mm housing format, an 11 mm bore, and push-pull parallel output through a 26-pin M23 connector. Its 9-bit singleturn and 4-bit multiturn arrangement makes it suitable for control systems that require direct bit-level position transmission and straightforward electrical interfacing. Typical production lead time: 15 working days. The original configuration uses optical sensing, gray code output, 10–30 VDC input, and IP65 protection.

Technical Key Parameters

• Parallel push-pull output
• 9-bit singleturn + 4-bit multiturn resolution
• Gray code output logic
• Blind hollow bore, 30 mm depth
• 11 mm bore diameter
• 58 mm housing format
• 10–30 VDC supply
• M23 male 26-pin connector
• IP65 protection
• Max speed up to 12000 rpm

Custom Solution Photos

Wiring and Installation Notes

This model should be treated as a parallel electrical integration task first and a mechanical replacement task second. Because the encoder outputs multiple bits directly through the M23 connector, wiring discipline is critical: each output bit, direction setting, and supply line should be assigned clearly in the cabinet layout before installation. The blind hollow bore structure also means shaft engagement depth must remain controlled to avoid unstable coupling or unnecessary misalignment. Compared with bus-based encoders, this configuration places more emphasis on I/O allocation, connector pin consistency, and signal organization inside the control system. It is especially useful where direct binary or gray-code style position acquisition is still preferred in existing equipment architecture.

Custom Compatible Encoder Solution

• Parallel push-pull output matching for direct PLC or controller input logic
• Blind hollow bore mechanical adaptation based on 11 mm shaft size
• M23 connector pin assignment customization for retrofit projects
• Output-direction and signal-logic adjustment for existing control systems

Lead Time and Custom Development

Typical production lead time is 15 working days. We can support custom development for bore size, connector definition, and signal matching when replacing existing parallel-output encoder installations.

Key Technical Data