We developed a custom solution for model UCD-DPC1B-1416-HTY0-H3P. This configuration targets applications requiring Profibus absolute multi-turn feedback, 58 mm blind hollow structure, and a 9.52 mm (3/8") shaft bore. The referenced page lists 16-bit single-turn + 14-bit multi-turn, 10–30 VDC supply, IP65 shaft-side / IP66-IP67 housing-side protection, and a magnetic multi-turn system with self-powered counting. Typical production lead time: 15 working days.
Technical Key Parameters
The strongest selection point of this version is the combination of Profibus communication and battery-free magnetic multi-turn retention. The source page specifies Profibus DP Class 2 profile support, transmission rate up to 12 Mbaud, and programmable settings for preset, scaling, direction, node number, filters, and diagnostics. The sensing section shows magnetic technology with 16-bit single-turn and 14-bit multi-turn resolution.
On the mechanical side, this model uses a blind hollow shaft depth of 28 mm with 3/8 inch bore, max speed 12000 rpm, and relatively low friction torque. That speed capability is an important engineering signal: compared with slower heavy-bore options, this version is more suitable where the shaft is smaller and rotation speed is higher. The housing remains corrosion-protected and sealed, which helps in industrial retrofits where cable routing and washdown exposure are both concerns.
Custom Solution Photos
Wiring and Installation Notes
This encoder uses radial cable gland output with separate bus in and bus out routing. The connection plan lists Bus line A, Bus line B, Power Supply+, and GND-. Since the structure includes address and termination related installation logic, the bus sequence should be verified before final enclosure closure. For 3/8 inch shaft projects, confirm shaft tolerance and clamping condition carefully, because small-bore blind hollow designs are less forgiving of mounting eccentricity than larger shaft systems.
Custom Compatible Encoder Solution
- Custom Profibus multi-turn encoder solution for 3/8 inch blind hollow shaft
- Suitable for projects needing battery-free multi-turn position retention
- Parameter setting can be aligned for preset, scaling, direction, and node assignment
- Good retrofit option where high speed + compact bore + bus communication are required
Lead Time and Custom Development
Typical production lead time: 15 working days.
We can develop the custom version according to shaft fit, bus installation layout, and required preset parameter behavior.
Key Technical Data
| Item | Data |
|---|---|
| Model | UCD-DPC1B-1416-HTY0-H3P |
| Interface | Profibus |
| Type | Absolute multi-turn |
| Sensing technology | Magnetic |
| Single-turn resolution | 16 bit |
| Multi-turn resolution | 14 bit |
| Supply voltage | 10–30 VDC |
| Protection class | IP65 shaft / IP66-IP67 housing |
| Housing size | 58 mm |
| Shaft type | Blind hollow |
| Shaft size | 9.52 mm (3/8") |
| Max speed | 12000 rpm |
