he XHI 862108556-1024 / 772152-01 encoder is used in industrial motion control systems where reliable incremental position feedback is required. For applications facing sourcing or lifecycle challenges, functionally equivalent replacement solutions can be provided, ensuring continued operation without changes to the existing control architecture.
This encoder configuration is typically applied in heavy-duty environments such as metallurgy, material handling, and large rotating machinery. With a resolution of 1024 pulses per revolution, it delivers stable and repeatable feedback for speed and position monitoring. The mechanical design and electrical interface are tailored for long-term operation under vibration, dust, and temperature variations commonly found in industrial settings.
Technical data
| Parameter | Specification |
|---|---|
| Operating temperature | -40 °C … +85 °C |
| Ingress protection class [IEC 60529] | IP67 (IP66 at shaft inlet) |
| Vibration [IEC 60068-2-6] | ≤ 200 m/s² |
| Shock [IEC 60068-2-27] | ≤ 1500 m/s² |
| Cover material | Aluminium (coated) |
| Weight | 1300 g |
| Shaft load (axial/radial) | 100 N / 300 N |
| Rotational speed max | 6000 rpm |
| Shaft material | Stainless steel with insulated hybrid bearings |
| Short circuit protected | Yes |
| Polarity protected | Yes |
| Current consumption | 60 mA at 24 Vdc (Max. 80 mA) |
| Output load | ± 40 mA |
| Output frequency max | 200 kHz |
| Cable length max | 350 m at 100 kHz |
| Channel separation | 90° el ± 25° el |
| Dividing error | ±50° el |
Encoder configuration
| Parameter | Specification |
|---|---|
| Code key description | 862108556 |
| Type | XHI |
| Model | 862 |
| Shaft type | Ø16 mm blind hollow shaft |
| Flange type | 86-flange |
| Resolution | 1024 |
| Power supply | 9-30 Vdc |
| Output signal | HC-HTL |
| Connection type | Cable gland |
| Connecting direction | Radial |
| Cable gland dimension | M20 for Ø11-14 mm cables |
| Number of channels | 6 |
| Advanced Diagnostic System | Available upon request |
| Overvoltage protection | Available upon request |
| Torque bracket | 120 degrees orientation |
