We have developed a custom solution for model PSS58I-F2AAGR0BN-0016, combining a 16-bit singleturn PROFIBUS platform with a 12 mm recessed hollow shaft and Inox housing configuration. This version is intended for projects that require finer angular output together with enhanced structural material selection. Typical production lead time: 15 working days.
Technical Key Parameters
- PROFIBUS interface, RS-485 layer
- Singleturn resolution: 16 bit
- Recessed hollow shaft: Ø12 mm × 30 mm
- Housing material: Inox / stainless structure
- Supply voltage: 10–30 VDC
Custom Solution Photos
Wiring and Installation Notes
This model uses terminal-compartment wiring, so the main field requirements are correct A/B line pairing, unique address setting, and proper termination management. The encoder should only have the internal resistor enabled when it is located at the physical end of the PROFIBUS line. For commissioning, verify that the controller-side parameter set matches the 16-bit singleturn structure. On the mechanical side, maintain proper shaft alignment, controlled insertion depth, and reliable anti-rotation fixation to preserve long-term accuracy.
Custom Compatible Encoder Solution
- 12 mm recessed hollow shaft structure
- 16-bit singleturn measurement
- Inox housing configuration
- Suitable for higher-resolution stainless-structure applications
Lead Time and Custom Development
This version can be prepared according to confirmed mechanical and communication requirements. Typical production lead time: 15 working days.
Technical Parameters Table
| Layer | Item | Specification |
|---|---|---|
| Interface | Communication | PROFIBUS / RS-485 |
| Resolution | Singleturn | 16 bit |
| Electrical | Supply voltage | 10–30 VDC |
| Mechanical | Shaft type | Recessed hollow shaft |
| Mechanical | Shaft size | Ø12 mm × 30 mm |
| Mechanical | Housing material | Inox / stainless structure |
| Environmental | Protection class | IP65 |
| Environmental | Operating temperature | -40 … 85 °C |
Technical Summary
This model is suited to PROFIBUS applications that require 16-bit singleturn angular feedback, 12 mm shaft installation, and an Inox housing configuration.
