For AVM78E-011KAR0GN-1213, EncoderWorks can provide a custom compatible replacement focused on Gray-code SSI cable mapping, 13/12-bit position scaling, KA connection verification, and Ø10 mm clamping-flange shaft fit. This model should not be treated like a standard K2, K5, or KR execution. The SSI interface may follow the same RS422 principle, but the KA connection segment should be checked against the original label, cable drawing, or machine wiring record before production approval.
The AVM78E-011KAR0GN-1213 is an explosion-proof SSI multiturn absolute rotary encoder configuration with Gray code, 13-bit singleturn resolution, 12-bit multiturn range, 10–30 VDC supply, aluminum housing execution, Ø10 mm x 20 mm solid shaft, clamping flange, KA connection style, and radial exit. The controller should continue reading 8192 steps per revolution across 4096 turns.
The first failure boundary is SSI cable assignment. Clock+ / Clock- and Data+ / Data- must remain true RS422 differential pairs. If conductor mapping, Gray decoding, shield grounding, preset input, or counting-direction input is changed, the SSI data can be present while the PLC reads the wrong absolute position.
This replacement fails when SSI communication is present, but the PLC reads the wrong position because cable assignment, Gray-code decoding, 13/12-bit word length, monoflop timing, preset input, or counting direction does not match the original encoder. That is a signal-chain and parameter failure, not simply a sensing failure.
The second boundary is KA connection and clamping-flange mechanics. The Ø10 mm solid shaft, flange reference, radial cable clearance, coupling fit, flameproof cable handling, and shaft load must be checked together. A mechanically correct encoder can still fail if the KA cable definition is assumed instead of verified.
The replacement decision should first confirm Gray SSI format, 13-bit singleturn and 12-bit multiturn mapping, KA radial connection requirement, Clock/Data differential pairs, 20 ±10 µs monoflop behavior, 10–30 VDC supply, PRESET zero-set input, counting-direction input, aluminum housing execution, Ø10 mm solid-shaft fit, clamping-flange mounting, radial cable clearance, shield grounding, flameproof cable handling, and shaft load. EncoderWorks treats AVM78E-011KAR0GN-1213 as an industrial encoder custom compatible solution where SSI cable accuracy and KA connection verification decide field reliability.
Typical production lead time: 15 working days.
Key Data
| Item | Data |
|---|---|
| Model | AVM78E-011KAR0GN-1213 |
| Encoder type | Explosion-proof multiturn absolute rotary encoder |
| Interface | SSI / RS422 |
| Resolution | 13-bit singleturn + 12-bit multiturn |
| Position range | 8192 steps x 4096 turns |
| Code | Gray |
| Supply voltage | 10–30 VDC |
| Transfer rate | 0.1–2 MBit/s |
| Housing execution | Aluminum |
| Shaft type | Solid shaft |
| Shaft size | Ø10 mm x 20 mm |
| Flange | Clamping flange |
| Connection | KA connection style, verify original execution |
| Exit position | Radial |
| Protection focus | ATEX / IECEx flameproof enclosure, IP66 |
| Main engineering anchor | Gray SSI and KA cable |
| Main failure boundary | Wrong cable mapping, Gray decoding error, connection mismatch, preset fault |
