This Custom Replacement for the CBE58-1024GKA01 parallel absolute encoder is developed for equipment that depends on fixed interface definitions and cannot accommodate design changes. Rather than adapting a standard product, this solution is produced specifically around the original encoder’s mechanical envelope and communication behavior. By aligning the mounting form, shaft interface, and signal structure at the design stage, it allows the encoder to be integrated into existing systems with no impact on control logic or machine configuration.
In practical use, the 1024-resolution configuration supports stable absolute position feedback for industrial automation, material handling equipment, and positioning mechanisms where reliability is more critical than ultra-high resolution. The product is optimized for continuous operation, with attention given to signal stability and environmental tolerance. Through an optimized custom manufacturing workflow, production can be completed within 15 working days, providing users with a predictable replacement option that supports maintenance planning and long-term equipment availability.
Technical data
| Sensor system | GaAlAs diodes, photo-transistor array |
| Resolution | 4096 positions / 360°; 8192 positions / 360° (optional); 3600 positions / 360° (optional) |
| Data Control - Bit (DCB) | Optional at ≤ 4096 positions |
| Disc coding | Gray or Gray - Excess |
| Measuring position deviation | ≤ ± 2'38'' at 4096 positions / 360°; ≤ ± 1'59'' at 8192 positions / 360° |
| Parallel output circuits | A = Open Collector Darlington; C = Open Emitter Darlington; D = Push - pull |
| Output frequency | 10 kHz max. |
| Latch | via signal input E1 |
| Enable circuit | on / off, via signal input E1 |
| Serial output circuit | E = SSI Differential to RS 422 / 485 |
| Output Code | Gray or Gray - Excess for non - binary outputs |
| Code sense | CW or CCW, via signal input E2 |
| Supply voltage range | +11 VDC to +30 VDC |
| Supply current (parallel) | 50 mA typ. / 70 mA max. |
| Supply current (serial SS) | 60 mA typ. / 80 mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10⁵ rad/s² max. |
| Inertial mass of rotor | 45 gcm² |
| Operating torque | ≤ 5 Nm (8 Nm - CBE 66) (at 1000 rpm) |
| Wind - up torque | ≤ 1 Nm (4 Nm - CBE 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ turns |
| Mass | 0.5 kg |
