This OEM encoder for the CRF65-4096G4096C21 is designed to fully replicate the original unit’s 4096×4096 multi-turn resolution and parallel output configuration. All essential mechanical and electrical characteristics—including flange dimensions, shaft interface, housing structure, and connector type—are reproduced according to the original specifications, ensuring direct installation without any system modification. It is intended as a stable OEM-level alternative for applications facing sourcing constraints, with a standard production cycle of 10–15 working days.
The encoder has been successfully applied in industrial projects across the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Users recognize its reliable multi-turn accuracy, robust mechanical design, and stable performance during continuous operation. Typical applications include CNC machinery, industrial automation systems, wind energy equipment, and material-handling installations where precise and dependable absolute position feedback is required.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
