Introduction
We have developed a custom solution for model PSS58N-F3AAGR0BN-0013, configured for PROFIBUS singleturn measurement tasks with a recessed hollow shaft design and standard 58 mm industrial form factor. This version is intended for applications that require a 15 mm shaft connection and consistent absolute angular feedback. Typical production lead time: 15 working days.
Technical Key Parameters
- PROFIBUS interface, RS-485 communication
- Singleturn resolution: 13 bit
- Recessed hollow shaft: Ø15 mm × 30 mm
- Supply voltage: 10–30 VDC
- Protection class: IP65
Custom Solution Photos
Wiring and Installation Notes
The AG structure uses internal terminals inside the removable housing cover. Bus wiring must follow the correct A/B differential sequence, and the node address must be unique within the network. The 220 Ω internal termination resistor should only be switched on for the final device in the bus segment. Shielded cable routing is recommended to improve communication stability in electrically noisy environments. Mechanically, the encoder is installed directly on the shaft without a coupling, so shaft fit, insertion depth, and anti-rotation restraint must all be controlled carefully.
Custom Compatible Encoder Solution
- 15 mm recessed hollow shaft configuration
- Terminal-compartment PROFIBUS integration
- 13-bit singleturn feedback structure
- Suitable for field installations requiring stable bus addressing
Lead Time and Custom Development
Production can be arranged after confirming shaft size, connection method, and control-side parameter logic. Typical production lead time: 15 working days.
Technical Parameters Table
| Layer | Item | Specification |
|---|---|---|
| Interface | Communication | PROFIBUS / RS-485 |
| Resolution | Singleturn | 13 bit |
| Electrical | Supply voltage | 10–30 VDC |
| Mechanical | Shaft type | Recessed hollow shaft |
| Mechanical | Shaft size | Ø15 mm × 30 mm |
| Mechanical | Housing material | Powder-coated aluminum |
| Environmental | Protection class | IP65 |
| Environmental | Operating temperature | -40 … 85 °C |
Technical Summary
This configuration is a practical singleturn PROFIBUS solution for installations that require a 15 mm hollow shaft, direct mounting, and reliable fieldbus communication.
