Introduction
We have developed a custom solution for model X700.I113228.T4, configured as an incremental encoder with solid shaft structure, clamping flange, push-pull output, and 2000 pulses per revolution. This version is intended for industrial motion feedback tasks that require stable pulse output, mechanical rigidity, and support for explosion-protection-oriented installation. Since this is a non-standard custom product in limited quantity, the unit supports explosion-proof function, but it does not include an explosion-proof certificate. Typical production lead time: 15 working days.
Technical Key Parameters
- Incremental output, 2000 PPR
- Supply voltage: 4.75…30 VDC
- Output signals: A, B, N + inverted
- Shaft: Ø10 mm solid shaft, clamping flange
- Protection class: IP67
Custom Solution Photos
Wiring and Installation Notes
This model uses cable output and push-pull signal transmission, so wiring work should focus on stable power supply, clean pulse signal routing, and shielding continuity. The standard assignment is GND, UB, Track A, Track B, Track N, and the corresponding inverted channels. Signal cables should be separated from motor power lines and inverter output lines to reduce interference. During installation, the shaft and flange must be aligned without forcing radial preload into the bearing system. The encoder is designed with a clamping flange and 10 mm solid shaft, so mounting concentricity and rigid fastening are more important than cable arrangement. In explosion-protection-oriented environments, cable sealing, housing integrity, and load limits must remain controlled throughout operation.
Custom Compatible Encoder Solution
- 2000 PPR pulse structure for motion feedback
- Push-pull output with A/B/N and inverted channels
- 10 mm solid shaft with clamping flange
- Suitable for installations requiring IP67 and robust mechanical housing
Lead Time and Custom Development
This model is produced as a non-standard custom configuration. Due to limited quantity, the product supports explosion-proof function, but no explosion-proof certificate is provided. Typical production lead time: 15 working days.
Technical Parameters Table
| Layer | Item | Specification |
|---|---|---|
| Output | Encoder type | Incremental |
| Output | Pulses per revolution | 2000 |
| Output | Signal format | A, B, N + inverted |
| Electrical | Supply voltage | 4.75…30 VDC |
| Electrical | Output stage | Push-pull, short-circuit proof |
| Mechanical | Shaft type | Solid shaft |
| Mechanical | Shaft size | Ø10 mm |
| Mechanical | Flange | Clamping flange |
| Mechanical | Cable length | 2 m axial |
| Environmental | Protection class | IP67 |
| Environmental | Temperature class | T4 |
Technical Summary
This configuration is suitable for applications that require 2000 PPR, 10 mm solid shaft installation, and stable incremental pulse output in demanding industrial environments.
