We have developed a custom solution for model PSS58I-F2AAGR0BN-0013, configured around a PROFIBUS singleturn encoder platform with Inox housing and a 12 mm recessed hollow shaft. This version is suitable for systems that require stainless structural configuration together with stable fieldbus-based absolute angle measurement. Typical production lead time: 15 working days.
Technical Key Parameters
- PROFIBUS interface, RS-485 communication
- Singleturn resolution: 13 bit
- Recessed hollow shaft: Ø12 mm × 30 mm
- Housing material: Inox / stainless structure
- Supply voltage: 10–30 VDC
Custom Solution Photos
Wiring and Installation Notes
This AG version uses terminal-compartment wiring. Bus IN and Bus OUT should be wired with consistent A/B polarity, and address duplication must be avoided. The internal resistor should only be activated when the encoder is installed as the last station on the bus. Since the shaft size is 12 mm, installation should ensure centered insertion and stable anti-rotation support. Stainless housing selection does not change the electrical commissioning logic, so shielding, grounding, and parameter consistency remain the main startup checks.
Custom Compatible Encoder Solution
- 12 mm recessed hollow shaft configuration
- Inox housing structure
- 13-bit singleturn absolute feedback
- Suitable for stainless-structure PROFIBUS installations
Lead Time and Custom Development
Production is arranged after confirmation of shaft interface, housing material, and communication settings. Typical production lead time: 15 working days.
Technical Parameters Table
| Layer | Item | Specification |
|---|---|---|
| Interface | Communication | PROFIBUS / RS-485 |
| Resolution | Singleturn | 13 bit |
| Electrical | Supply voltage | 10–30 VDC |
| Mechanical | Shaft type | Recessed hollow shaft |
| Mechanical | Shaft size | Ø12 mm × 30 mm |
| Mechanical | Housing material | Inox / stainless structure |
| Environmental | Protection class | IP65 |
| Environmental | Operating temperature | -40 … 85 °C |
Technical Summary
This configuration is suitable for PROFIBUS systems that require 12 mm shaft fit, 13-bit singleturn output, and a more robust stainless structural arrangement.
