X700.I113226.T4 Incremental Encoder Custom Solution

We have developed a custom solution for model X700.I113226.T4, built for incremental motion feedback with 1500 pulses per revolution, push-pull output, and a 10 mm solid shaft mechanical interface. This version is suitable for applications requiring denser pulse output than standard low-resolution monitoring models. Since this is a non-standard custom product in limited quantity, the unit supports explosion-proof function, but it does not include an explosion-proof certificate. Typical production lead time: 15 working days.

Technical Key Parameters

• Incremental output, 1500 PPR
• Supply voltage: 4.75…30 VDC
• Output signals: A, B, N + inverted
• Shaft: Ø10 mm solid shaft
• Protection class: IP67

Custom Solution Photos

Wiring and Installation Notes

At 1500 PPR, pulse integrity depends on correct cable routing, stable UB/GND reference, and low-noise controller input handling. The A, B, and N lines should be assigned strictly according to the standard core sequence. Mechanically, the clamping flange should be installed on a flat mounting face, and shaft coupling quality should prevent unnecessary radial force. Explosion-protection-oriented applications should preserve cable sealing and housing completeness during maintenance.

Custom Compatible Encoder Solution

• 1500 PPR incremental output
• Push-pull signal format
• 10 mm solid shaft with clamping flange
• Suitable for higher-density industrial pulse feedback

Lead Time and Custom Development

This version is supplied as a non-standard custom product. Due to limited quantity, the product supports explosion-proof function, but no explosion-proof certificate is provided. Typical production lead time: 15 working days.

Technical Parameters Table

Technical Summary

This model is suitable for 1500 PPR incremental feedback tasks requiring stable shaft installation and durable industrial construction.