This OEM replacement for the DAF65-12B01 is engineered to match the original 4–20 mA absolute output and mechanical interface with high precision. Designed as a 1:1 customized alternative, it supports direct installation without structural or electrical changes. By streamlining the customization and manufacturing process, this solution helps reduce replacement cost while significantly shortening delivery time. In most cases, production can be completed within 15 working days, making it suitable for urgent replacement or phased system upgrades.
From a technical perspective, the encoder ensures stable current-loop transmission in environments with electromagnetic interference or extended cable lengths. Absolute position feedback remains accurate and repeatable, supporting reliable control performance. Low-volume and non-standard configurations are available, allowing this OEM solution to meet the practical needs of industrial automation, material handling equipment, and process control systems where fast availability and long-term stability are essential.
Electrical data
| Parameter | Value |
| Valid for all versions | Unless otherwise stated |
| Sensor system: | GaAIAs diode, photo-transistor array, precision comparator |
| Setting cycles EEPROM: | ≥10^6 |
| Multifunctional inputs (MFP): | Depending on adjusting mode (signal input E6) |
| Memory circuit (latch): | Through MFP |
| Disc coding: | Gray code |
| Signal sense: | CW or CCW (signal input E6) |
| Supply voltage range V_s: | +20 to +26 VDC, 15±0.5VDC(optional) |
| Supply current I_s: | 80 mA typ. / 120 mA max. (when output current = 0) |
| Linearity: | 0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted |
| Temperature drift: | 0.0015% / K typ. |
| Current output | |
| Accuracy | |
| at starting point 0 mA: | 0 mA ±5 μA typ. / ±15 μA max. |
| at end point 4 mA: | 4 mA ±5 μA typ. / ±15 μA max. |
| Load resistance: | 0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC |
| Voltage output | |
| Accuracy | |
| at starting point 0 V: | 0 V ±2.5 mV typ. / ±7.5 mV max. |
| at end point 10 V: | 10 V ±2.5 mV typ. / ±7.5 mV max. |
| Output current: | 5 mA max. When load resistance > 2 kΩ (short circuit proof) |
