This custom replacement for the CRF65-4096G4096C32 is engineered to reproduce the original parallel absolute encoder’s full 4096×4096 multi-turn resolution and signal behavior. All installation-related details, including shaft configuration, flange interface, housing dimensions, and connector positioning, are matched to the original design, allowing direct replacement without mechanical or electrical changes. The solution is intended for users who require precise absolute feedback and a stable supply channel, with a standard production lead time of 10–15 working days.
The replacement has been applied successfully in industrial projects across Russia, the Middle East, Southeast Asia, Brazil, and Ukraine. Users highlight its stable multi-turn accuracy, solid mechanical structure, and reliable long-term operation. It is well suited for CNC equipment, automated production lines, lifting and handling systems, and energy-related machinery where dependable absolute position feedback is essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
