For discontinued or supply-limited CE58-1024GA02 parallel absolute encoders, we provide a precision 1:1 custom solution developed for direct industrial replacement. The encoder replicates original mechanical dimensions, shaft specifications, connector positioning, and parallel signal output to ensure full compatibility with existing automation systems. It can be installed without modifying control parameters or wiring structures, reducing retrofit risk and lowering overall replacement costs.
With a standard lead time of approximately 15 working days, this solution effectively addresses urgent maintenance demands and supports small-batch non-standard manufacturing. Each unit undergoes strict electrical calibration and environmental reliability testing to guarantee stable signal transmission under continuous industrial workloads. It is suitable for motion control equipment, positioning systems, and heavy-duty machinery requiring dependable parallel absolute feedback and long-term operational stability.
Technical data
| Sensor system | GaAlAs diode, photo-transistor array |
| Parallel outputs circuits A | Open collector Darlington |
| Parallel outputs circuits B | Open collector, TTL compatible |
| Parallel outputs circuits C | Open emitter Darlington |
| Supply voltage range | +10.5 V to 26.5 VDC |
| Supply current | 50 mA |
| Output frequency | 30 kHz max. |
| Measurement position deviation | 10° |
| Disc coding | 10 bit |
| Code sense | Gray code or Gray-Excess (CW or CCW selectable by connecting MSB or LSB) |
| Enable circuit (for bus operation) | Active or inactive (Signal input ET) |
| Operating speed (continuous) | 3000 rpm max. |
| Operating speed (short period) | 4000 rpm max. |
| Inertial mass of rotor | 35 gcm² |
| Operating torque | ≤ 1 Ncm |
| Wind-up torque | ≤ 0.2 Ncm |
| Permissible axial and radial shaft load | 100 N |
| Bearing life expectancy | 10⁸ revolutions |
| Operating temperature range | -5°C to +60°C |
| Storage temperature range | –25°C to +70°C |
| Resistance to shock | 200 m/s², 11 ms |
| Resistance to vibration | 5 Hz ... 1000 Hz; 100 m/s² |
| Protection | IP 65 when used with the supplied connector cover |
| Mass | 240 g |
