HOG 163 DN 1024 I 55H7 Incremental Encoder Custom Solution

A project-specific compatible encoder solution can be arranged for HOG 163 DN 1024 I 55H7 in replacement, maintenance, retrofit, and upgrade projects. This version combines a 55 mm H7 through hollow shaft with 1024 ppr HTL incremental output and terminal box field wiring. Typical production lead time: 15 working days. The aim is to maintain the original shaft interface, electrical level, and installation logic so the encoder can be integrated with minimal system change.

Technical Overview of the HOG 163 DN 1024 I 55H7 Encoder

This model belongs to an optical incremental encoder family with heavy-duty through hollow shaft design. It uses HTL output with complementary channels and provides K1, K2, and K0 zero pulse signals. The coded configuration identifies 1024 pulses per revolution and a 55 mm H7 shaft diameter. The platform supports up to 120 kHz output frequency, IP56 enclosure protection, and operation in temperatures from -40 to +85 °C.

The terminal box arrangement is relevant where cable entry, grounding, and shield termination should remain consistent with the installed machine wiring concept. This helps simplify field replacement in industrial environments.

Industrial Integration Considerations

A 55 mm hollow shaft version should be reviewed carefully because the bore size often reflects a specific machine shaft standard. During engineering matching, shaft tolerance, torque arm geometry, and terminal box direction should be checked together. This approach helps reduce the risk of mechanical adaptation or cable rerouting during retrofit work.

On the electrical side, HTL output continuity matters in systems that rely on higher-voltage incremental interfaces. Preserving complementary channel behavior and zero pulse logic supports field installation continuity and smoother controller-side recommissioning.

Custom Compatible Encoder Solution

For HOG 163 DN 1024 I 55H7, a custom compatible encoder solution should preserve the 55 mm H7 through hollow shaft, 1024 ppr output structure, HTL output with inverted channels, and terminal box connection format. This keeps both the mechanical and signal sides of the application aligned with the original installation.

If specific mounting accessories, insulated torque arms, or grounding kits are used in the original equipment, those items should be confirmed during engineering review so the final solution matches the field configuration.

Custom Solution Photos

Lead Time and Custom Development

Typical production lead time: 15 working days.

Custom development should review shaft diameter, signal level, pulse count, terminal box entry, and torque arm arrangement. These details are the main compatibility points for this version.

Typical Technical Parameters