OCM-EIC1B-0016-E14W-HFZ Posital Absolute Encoders Profinet (Replacement model)

We provide OCM-EIC1B-0016-E14W-HFZ encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges.

OCM-EIC1B-0016-E14W-HFZ Posital Absolute Encoders Profinet (Replacement model)-EncoderWorks
OCM-EIC1B-0016-E14W-HFZ Posital Absolute Encoders Profinet (Replacement model)-EncoderWorks

Interface

InterfaceProfinet
ProfileProfidrive Profile 4.x, Encoder Profile 4.0, 4.1, 4.2
DiagnosticsDifferent faults and warnings for Memory, Temperature, Synchronization, Commissioning diagnostics, Commissioning invalid scaling, Communication, Master’s sign of life
FeaturesBoot-Loader, Round Axis, Flashing LEDs, MRP, MRPD, Acceleration values
Transmission Rate100 Mbit
Interface Cycle Time≥ 125 µs
Programming FunctionsResolution, time base and filter for velocity, preset, counting direction, IP-Address, Fractional scaling, Encoder parameter control via GSDML or Non-Volatile memory

Outputs

Output DriverEthernet

Electrical Data

Supply Voltage10 – 32 VDC
Current Consumption≤ 250 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption≤ 3 W
Start-Up Time< 15 s
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF95 years @ 40 °C

Sensor

TechnologyOptical
Resolution Singleturn16 bit
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeBinary

Environmental Specifications

Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity98% RH, no condensation
Max Temperature+70 °C (+158 °F)
Min Temperature-40 °C (-40 °F)

Mechanical Data

Connection Cap MaterialStainless Steel V4A (1.4404; 316 L)
Housing MaterialStainless Steel V4A (1.4404, 316 L)
Housing CoatingNo Coating
Flange TypeBlind Hollow, ø 78mm ATEX
Flange MaterialStainless steel V4A (1.4404, 316 L)
Shaft TypeBlind Hollow, Depth = 30 mm
Shaft Diameterø 14 mm (0.55")
Max. Shaft LoadAxial 60 N, Radial 80 N
Rotor Inertia≤ 35 gcm² [≤ 0.2 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 11 ms, EN 60068-2-27)
Vibration Resistance≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6)
Length134 mm (5.28")
Weight3110 g (6.86 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm

Electrical Connection

Connection OrientationRadial
Connection Type2 x Blind Plug, Radial

Certification

ApprovalCE + ATEX Zone 1 & 21 (Mining)