OCM-EIC1B-0013-F10W-5RW Posital Absolute Encoders Profinet (Replacement model)
We provide OCM-EIC1B-0013-F10W-5RW encoder replacement solutions, the use of non-standard form for the production of alternative products, the application parameters of all 1:1. Perfect replacement of the prototype encoder, to solve the procurement and other challenges.
Interface
Interface Profinet Profile Profidrive Profile 4.x, Encoder Profile 4.0, 4.1, 4.2 Diagnostics Different faults and warnings for Memory, Temperature, Synchronization, Commissioning diagnostics, Commissioning invalid scaling, Communication, Master’s sign of life Features Boot-Loader, Round Axis, Flashing LEDs, MRP, MRPD, Acceleration values Transmission Rate 100 Mbit Interface Cycle Time ≥ 125 µs Programming Functions Resolution, time base and filter for velocity, preset, counting direction, IP-Address, Fractional scaling, Encoder parameter control via GSDML or Non-Volatile memory
Outputs
Electrical Data
Supply Voltage 10 – 32 VDC Current Consumption ≤ 250 mA @ 10 V DC, ≤ 100 mA @ 24 V DC Power Consumption ≤ 3 W Start-Up Time < 15 s Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 95 years @ 40 °C
Sensor
Technology Optical Resolution Singleturn 13 bit Accuracy (INL) ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit) Code Binary
Environmental Specifications
Protection Class (Shaft) IP66/IP67 Protection Class (Housing) IP66/IP67 Storage Temperature -40 °C (-40 °F) – +85 °C (+185 °F) Humidity 98% RH, no condensation Max Temperature +70 °C (+158 °F) Min Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F)
Mechanical Data
Connection Cap Material Stainless Steel V4A (1.4404; 316 L) Housing Material Stainless Steel V4A (1.4404, 316 L) Housing Coating No Coating Flange Type Clamp, ø 78 mm, ATEX Flange Material Stainless steel V4A (1.4404, 316 L) Shaft Type Solid, Single Flat, Length = 20 mm Shaft Diameter ø 10 mm (0.39") Max. Shaft Load Axial 60 N, Radial 80 N Rotor Inertia ≤ 35 gcm² [≤ 0.2 oz-in²] Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) Max. Permissible Mechanical Speed ≤ 3000 1/min Shock Resistance ≤ 100 g (half sine 11 ms, EN 60068-2-27) Vibration Resistance ≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6) Length 134 mm (5.28") Weight 2735 g (6.03 lb)
Electrical Connection
Connection Orientation Radial Minimum Bend Radius 50 mm (2") fixed, 100 mm (4") flexing Connection Type Cable / Connector
Certification
Approval CE + ATEX Zone 1 & 21 (Mining)
