We offer fully customizable replacement solutions for the OCM-CAA1B-1416-E14W-HFE absolute encoder. Our team can customize specifications, performance parameters, and dimensions to ensure compatibility with the original model or surpass its performance while ensuring seamless integration. Customization options include resolution, mechanical dimensions, and environmental protection ratings. As a reliable alternative supplier, we provide professional technical support tailored to your specific application requirements.

OCM-CAA1B-1416-E14W-HFE Direct Replacement | Customizable Absolute Encoder Solution-EncoderWorks
OCM-CAA1B-1416-E14W-HFE Direct Replacement | Customizable Absolute Encoder Solution-EncoderWorks

Interface

InterfaceCANopen
ProfileDS-406
Manual FunctionsAddress selector switch 0-99 and terminal resistor (with connection cap)
FeaturesRound Axis
Transmission Ratemin. 20 kBaud, max. 1 MBaud
Interface Cycle Time≥ 1 ms
Programming FunctionsResolution, preset, 2 limit switches, 8 CAMS, baud rate, CAN-Identifier, bootloader, transmission modes: polled, cyclic, sync

Outputs

Output DriverTransceiver (ISO 11898), Galvanically Isolated by Opto-Couplers

Electrical Data

Supply Voltage10 – 30 VDC
Current Consumption≤ 230 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption≤ 2.5 W
Start-Up Time< 1 s
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Electrical Lifetime>10⁵ h

Sensor

TechnologyOptical
Resolution Singleturn16 bit
Resolution Multiturn14 bit
Multiturn TechnologyMechanical Gearing (no Battery)
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeBinary

Environmental Specifications

Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity98% RH, no condensation
Max Temperature+70 °C (+158 °F)
Min Temperature-40 °C (-40 °F)

Mechanical Data

Connection Cap MaterialStainless Steel V4A (1.4404; 316 L)
Housing MaterialStainless Steel V4A (1.4404, 316 L)
Housing CoatingNo Coating
Flange TypeBlind Hollow, ø 78mm ATEX
Flange MaterialStainless steel V4A (1.4404, 316 L)
Shaft TypeBlind Hollow, Depth = 30 mm
Shaft Diameterø 14 mm (0.55")
Max. Shaft LoadAxial 60 N, Radial 80 N
Rotor Inertia≤ 35 gcm² [≤ 0.2 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 11 ms, EN 60068-2-27)
Vibration Resistance≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6)
Length109 mm (4.29")
Weight3110 g (6.86 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm

Electrical Connection

Connection OrientationRadial
Connection Type3 x Blind Plug, Radial

Certification

ApprovalCE + ATEX Zone 1 & 21 (Mining)