We provide fully customizable replacement solutions for the OCD-EEC1B-0016-C12V-PRM absolute encoder. Our team can tailor specifications, performance parameters, and physical dimensions to ensure full compatibility with the original encoder or even exceed its performance, while guaranteeing seamless integration into your system. Customization covers resolution, mechanical size, and environmental protection ratings, among other aspects. As a trusted alternative supplier, we deliver dedicated technical support designed to meet your specific application needs.

OCD-EEC1B-0016-C12V-PRM：EtherNet Encoder Replacement Solution-EncoderWorks
OCD-EEC1B-0016-C12V-PRM：EtherNet Encoder Replacement Solution-EncoderWorks

Interface

InterfaceEtherNet/IP
ProfileCIP (Common Industrial Protocol)
DiagnosticsError and Warning Bits
FeaturesBoot-Loader, Round Axis, DLR, Velocity, Acceleration and Temperature values
Transmission Rate100 Mbit
Interface Cycle Time≥ 1 ms
Programming FunctionsResolution, time base and filter for velocity, preset, counting direction, parameter control priority, IP-Address

Outputs

Output DriverEthernet

Electrical Data

Supply Voltage10 – 30 VDC
Current Consumption≤ 250 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption≤ 3 W
Start-Up Time< 15 s
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF95 years @ 40 °C

Sensor

TechnologyOptical
Resolution Singleturn16 bit
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeBinary

Environmental Specifications

Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Min Temperature-40 °C (-40 °F)
Max Temperature+85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity98% RH, no condensation

Mechanical Data

Housing MaterialStainless Steel V2A (1.4305, 303)
Housing CoatingNo Coating
Flange TypeClamp, ø 58 mm (C)
Flange MaterialStainless steel V2A (1.4305; 303)
Shaft TypeSolid, Single Flat, Length = 20 mm
Shaft Diameterø 12 mm (0.47")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Max. Shaft LoadAxial 40 N, Radial 110 N
Minimum Mechanical Lifetime(10^8 revolutions with Fa/Fr)430 (20N/40N), 150 (40N/60N), 100 (40N/80N), 55 (40N/110N)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length69 mm (2.72")
Weight840 g (1.85 lb)

Electrical Connection

Connection OrientationRadial
Connector 1M12, Female, 4 pin, d coded
Connector 2M12, Male, 4 pin, a coded
Connector 3M12, Female, 4 pin, d coded

Certification

ApprovalCE

Product Life Cycle

Product Life CycleNew