This replacement solution for the DAF58-12B01 is engineered to fully match the original 4–20 mA absolute output and shaft configuration. Designed as a true 1:1 customized alternative, it allows direct installation into existing equipment without mechanical changes or signal adjustments. By adopting a streamlined customization and manufacturing process, this solution helps lower replacement cost while significantly reducing delivery time. Typical production lead time is around 15 working days, making it suitable for urgent replacement and lifecycle support needs.
From a technical standpoint, the encoder delivers stable and accurate analog absolute feedback under varying environmental conditions. The current-loop signal remains reliable over long cable distances and in electrically noisy environments. Low-volume and non-standard customization can be supported, ensuring flexibility for industrial machinery and automation systems that require dependable performance, fast availability, and long-term operational stability.
Electrical data
| Parameter | Value |
| Valid for all versions | Unless otherwise stated |
| Sensor system: | GaAIAs diode, photo-transistor array, precision comparator |
| Setting cycles EEPROM: | ≥10^6 |
| Multifunctional inputs (MFP): | Depending on adjusting mode (signal input E6) |
| Memory circuit (latch): | Through MFP |
| Disc coding: | Gray code |
| Signal sense: | CW or CCW (signal input E6) |
| Supply voltage range V_s: | +20 to +26 VDC, 15±0.5VDC(optional) |
| Supply current I_s: | 80 mA typ. / 120 mA max. (when output current = 0) |
| Linearity: | 0.025% typ. / 0.05% max. (+2 LSB), 12 Bit monotory warranted |
| Temperature drift: | 0.0015% / K typ. |
| Current output | |
| Accuracy | |
| at starting point 0 mA: | 0 mA ±5 μA typ. / ±15 μA max. |
| at end point 4 mA: | 4 mA ±5 μA typ. / ±15 μA max. |
| Load resistance: | 0 to 500Ω at V_s = 20 to 26 VDC, 0 to 1000Ω at V_s = 22 to 26 VDC |
| Voltage output | |
| Accuracy | |
| at starting point 0 V: | 0 V ±2.5 mV typ. / ±7.5 mV max. |
| at end point 10 V: | 10 V ±2.5 mV typ. / ±7.5 mV max. |
| Output current: | 5 mA max. When load resistance > 2 kΩ (short circuit proof) |
