This OEM encoder replacement for the CRF65-4096G4096C18 is engineered to maintain full compatibility with the original unit, preserving the 4096×4096 multi-turn resolution and parallel output characteristics. All mechanical and electrical elements—including housing size, flange structure, shaft interface, mounting depth, and connector orientation—are precisely reproduced to support true plug-and-play installation without any system changes. The solution is intended for users facing sourcing difficulties while requiring stable, high-precision absolute feedback. Standard production lead time is 10–15 working days.
This OEM encoder has been successfully deployed by customers in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Users highlight its durable construction, consistent signal accuracy, and reliable multi-turn performance under continuous operation. It is widely applied in CNC machinery, automated production lines, wind energy equipment, and other heavy-duty industrial systems where dependable absolute position feedback is essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
