The CRF65-4096G4096C01 Replacement Solution is developed as a highly compatible parallel encoder alternative, accurately matching the original 4096×4096 multi-turn resolution and parallel output interface. All critical parameters—including shaft interface, flange dimensions, housing structure, mounting depth, and electrical connections—are precisely reproduced to ensure true plug-and-play installation. This solution is intended for users seeking to lower replacement costs, avoid long sourcing cycles, and maintain uninterrupted absolute position feedback. Standard production lead time is 10–15 working days.
This replacement solution has been delivered to industrial users in the Middle East, Southeast Asia, Russia, Brazil, and Ukraine. Customers recognize its stable multi-turn accuracy, strong mechanical reliability, and consistent long-term performance. It integrates effectively into CNC equipment, automated production lines, material-handling systems, and wind energy applications where dependable absolute feedback is essential.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
