This replacement model for the CRF65-1024R0001C99 is engineered to match the original encoder’s 1024-pulse resolution and parallel signal output with full mechanical and electrical compatibility. Key installation features—including shaft configuration, flange dimensions, housing geometry, and interface layout—are reproduced precisely to support direct plug-and-play mounting. It is designed for users seeking a dependable alternative when original supply is limited or lead times are extended. Standard production and delivery are completed within 10–15 working days.
The replacement model has been applied successfully in markets such as Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Customers highlight its stable signal output, robust mechanical structure, and consistent operational accuracy. It performs reliably in CNC equipment, automated production systems, wind energy machinery, and material-handling applications, delivering steady feedback performance in demanding industrial environments.
Technical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
