For projects facing unstable supply channels or extended lead times for the CR105-1000B25A01 parallel absolute encoder, we provide a structured technical solution based on full custom manufacturing. This replacement approach is designed for users who require mechanical and electrical compatibility without modifying existing equipment architecture. During the engineering phase, we replicate key parameters including mounting interface, shaft structure, housing dimensions, and parallel signal configuration. The result is a practical drop-in solution that minimizes installation risk and preserves original control logic. Standard production is typically completed within 15 working days, supporting urgent maintenance and retrofit demands.
This solution has been applied across multiple industrial regions and integrated into heavy-duty automation, positioning platforms, and motion control assemblies. The encoder maintains stable parallel signal transmission and reliable angular feedback under continuous-duty conditions. By refining our internal production workflow and component sourcing strategy, we have improved delivery predictability while maintaining cost efficiency. The replacement model is engineered to balance performance stability, installation compatibility, and long-term operational reliability in demanding industrial environments.
Technical data
| Parameter | Value |
|---|---|
| Resolution | 2 to 4096 positions / 360° |
| Measuring range | 2 to 4096 turns |
| Total number of positions | |
| Measurement position deviation | |
| Output frequency* | 30 kHz max. up to 10 Bit / 360°; 10 kHz max. from 11 Bit |
| Disc coding | Gray code |
| Output code, parallel | Gray or Natural Binary |
| Code sense, serial | CW or CCW (Signal input E2) |
| Logic polarity | Positive |
| Memory circuit | Store or not store, signal input E1 |
| Enable circuit (for bus operation) | Active or inactive, (signal input E1) |
| Sensor system | GaAlAs diodes, photo-transistor array |
| Parallel output circuits | A = Open collector Darlington; B = Open collector, TTL compatible; C = Open emitter Darlington; D = Push-pull, Totem-pole |
| Serial output SSI | Differential data output to RS 422 |
| Clock input SSI | Differential (opto-coupler) for data driver to RS 422 |
| Supply voltage range | +11 V to +26 VDC |
| Supply current | Parallel: 90 mA typ. / 120 mA max.; Serial GSI: 130mA typ. / 160mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10° rad/s² max. |
| Inertial mass of rotor | ≤ 5 Ncm (8 Ncm - CR 66) |
| Wind-up torque | ≤ 1 Nm (4 Ncm - CR 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ revolutions |
| Operating temperature range | -20°C to +60°C |
| Storage temperature range | -25°C to +70°C |
| Permissible rel. humidity | 85% without condensation |
| Resistance to shock | 200 m/s², 11 ms (DIN IEC 68) |
| Resistance to vibration | 5 Hz..1000 Hz; 100 m/s² (DIN IEC 68) |
