The CBE65-4096GKC03 Replacement Model is engineered as a true one-to-one substitute for parallel-output absolute encoder applications where exact compatibility is essential. Through dedicated non-standard manufacturing, the encoder reproduces the original unit’s structural proportions, shaft form, mounting pattern, and parallel signal characteristics. This approach allows maintenance teams to replace the encoder directly on existing equipment without redesigning brackets, rewiring interfaces, or reconfiguring control parameters, making it especially suitable for legacy systems that must remain in service.
In practical use, this replacement model supports stable and repeatable feedback in industrial automation systems such as assembly lines, material handling equipment, and positioning platforms. Its signal consistency and mechanical rigidity contribute to dependable operation under continuous workloads. With a controlled production cycle of 15 working days, users benefit from predictable delivery and reduced downtime risk, enabling efficient maintenance planning while extending the usable life of installed machinery.
Technical data
| Sensor system | GaAlAs diodes, photo-transistor array |
| Resolution | 4096 positions / 360°; 8192 positions / 360° (optional); 3600 positions / 360° (optional) |
| Data Control - Bit (DCB) | Optional at ≤ 4096 positions |
| Disc coding | Gray or Gray - Excess |
| Measuring position deviation | ≤ ± 2'38'' at 4096 positions / 360°; ≤ ± 1'59'' at 8192 positions / 360° |
| Parallel output circuits | A = Open Collector Darlington; C = Open Emitter Darlington; D = Push - pull |
| Output frequency | 10 kHz max. |
| Latch | via signal input E1 |
| Enable circuit | on / off, via signal input E1 |
| Serial output circuit | E = SSI Differential to RS 422 / 485 |
| Output Code | Gray or Gray - Excess for non - binary outputs |
| Code sense | CW or CCW, via signal input E2 |
| Supply voltage range | +11 VDC to +30 VDC |
| Supply current (parallel) | 50 mA typ. / 70 mA max. |
| Supply current (serial SS) | 60 mA typ. / 80 mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10⁵ rad/s² max. |
| Inertial mass of rotor | 45 gcm² |
| Operating torque | ≤ 5 Nm (8 Nm - CBE 66) (at 1000 rpm) |
| Wind - up torque | ≤ 1 Nm (4 Nm - CBE 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ turns |
| Mass | 0.5 kg |
