The CBE58-8192GKA02 Replacement Model is designed as a true drop-in alternative for parallel absolute encoder applications that demand strict specification continuity. Rather than adapting a standard product, this replacement is built using dedicated non-standard processes to reproduce the original encoder’s form factor, mounting geometry, shaft interface, and parallel output behavior. This approach allows the encoder to be installed directly on existing equipment while preserving original wiring schemes and control logic, avoiding reconfiguration risks during maintenance or retrofit work.
With its 8192-resolution architecture, this model supports high-definition absolute position feedback required in servo-driven machinery, coordinated automation systems, and precision positioning equipment. The internal structure is optimized for signal consistency and resistance to electrical interference during long operating cycles. By standardizing key production steps, the manufacturing cycle is controlled within 15 working days, giving users a predictable supply option that helps reduce downtime and maintain stable operation in legacy and active production systems alike.
Technical data
| Sensor system | GaAlAs diodes, photo-transistor array |
| Resolution | 4096 positions / 360°; 8192 positions / 360° (optional); 3600 positions / 360° (optional) |
| Data Control - Bit (DCB) | Optional at ≤ 4096 positions |
| Disc coding | Gray or Gray - Excess |
| Measuring position deviation | ≤ ± 2'38'' at 4096 positions / 360°; ≤ ± 1'59'' at 8192 positions / 360° |
| Parallel output circuits | A = Open Collector Darlington; C = Open Emitter Darlington; D = Push - pull |
| Output frequency | 10 kHz max. |
| Latch | via signal input E1 |
| Enable circuit | on / off, via signal input E1 |
| Serial output circuit | E = SSI Differential to RS 422 / 485 |
| Output Code | Gray or Gray - Excess for non - binary outputs |
| Code sense | CW or CCW, via signal input E2 |
| Supply voltage range | +11 VDC to +30 VDC |
| Supply current (parallel) | 50 mA typ. / 70 mA max. |
| Supply current (serial SS) | 60 mA typ. / 80 mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10⁵ rad/s² max. |
| Inertial mass of rotor | 45 gcm² |
| Operating torque | ≤ 5 Nm (8 Nm - CBE 66) (at 1000 rpm) |
| Wind - up torque | ≤ 1 Nm (4 Nm - CBE 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ turns |
| Mass | 0.5 kg |
