For applications using the BAV 1G.24K1024-C6-5 model, we provide a parallel 1:1 replacement solution designed to fully match the original encoder in mechanical dimensions, electrical interface, and Gray code output. This allows direct installation without any changes to wiring, control logic, or system configuration.
This single-turn absolute encoder supports parallel output with up to 12-bit resolution, delivering reliable and repeatable position feedback for industrial motion control. It operates on a 10–30 V DC supply, with low power consumption and fast signal response. Featuring a servo flange, aluminum housing, and IP65 protection, it is well suited for automation equipment, servo systems, and precision machinery where stable absolute position feedback is required.
Technical data
| Parameter | Value |
| voltage supply | 10 - 30 VDC (24K) |
| max. supply current no load | 70 mA (at 24 VDC) (24K) |
| steps/rev | see order designation |
| max. resolution | 12 bit (1 step = 5' 16") |
| pulse tolerance | ±1/2 step |
| max. switching frequency | 50 kHz |
| Parameter | Value |
| max. revolutions | mech. 12'000 rmp electr. dep. on number of steps |
| moment of interia | typ. 19,7 x 10⁻⁷ kgm² |
| torque | typ. 3,2 cNm (3'000 rmp / 20 °C) |
| max. shaft load | axial: 10 N, radial: 20 N |
| product life | depending on ambient conditions (typ. 10⁹ rev.) |
| max. protection class | shaft: IP 65, housing: IP 65 |
| material | housing: aluminum, flange: aluminum |
| weight | approx. 450 g |
| Parameter | Value |
| temperature range | -20...+85 °C |
| relative humidity | max. 95% non condensing |
| vibration | IEC 60068-2-6 (≤ 100 m/s² / 10 - 200 Hz) |
| shock | IEC 60068-2-27 (≤ 500 m/s² / 11 ms) |
| noise immunity | EN 61000-6-2 |
| emitted interference | EN 61000-6-3 |
